Grenades
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Next | Page 7 of 27 |
.jpg)  |
INERT DEACTIVATED. British, 1956 Dated 2” Proof Mortor. - O 2064 INERT DEACTIVATED. This is a rare and original British, 1956 dated 2inch Proof mortor which was used to proof 2 inch mortor barrels. The mortor retains most of its original black painted finish (Proof) and is made out of a turned solid steel 2 inch diameter body with a tubular tail section secured to the body by a screw. This tail section is ventilated for the firing cartridge. The body of the mortor is stamped round its circumference 2LB 15OZS 2MOR1 11/56 (November 1956 date), a crowfoot and 2 manufacturers marks. The base of the tail assembly has an alloy safety cap which is embossed CRB on one side and 42 (1942 date) on the other. Due to the nature of a proof round, there are no stabilising fins. The price includes UK delivery and no licence is required to possess this inert mortor in the UK if retained as part of a collection or display. O 2064 £175.00 |
 |
.jpg) |
INERT DEACTIVATED. Unfired, British, L49A1 Practice Tracer Carl Gustaf 84mm Anti-Tank Round. - O 2063 INERT DEACTIVATED. This is an unfired British 84mm Carl Gustaf recoilless rifle L49A1 practice tracer round which was named after Carl Gustafs Stads Gevärsfaktori who initially produced it the rifle. The weapon is a shoulder-fired recoilless rifle, initially developed by the Royal Swedish Army Materiel Administration during the second half of the 1940s as a close-range anti-tank and support weapon for infantry. The rifle is a lightweight, low-cost weapon that uses a wide range of ammunition, which makes it extremely flexible and suitable for a wide variety of roles. Development of the initial model started from 1946 as one of the many recoilless rifle designs of that era and was in service from 1948. The weapon was in service with the British Army from 1962 and is still used in updated versions. This is a Drill L50A1 84mm Carl Gustaf round commonly called the Charlie G in the British Army and consists of an black anodised alloy cartridge case has a blow out base and is stencilled in white round its circumference FFV 0584035 PRAC A TK L49A1 . The projectile is anodised mid blue round its middle for practice and is stencilled round its circumference in white 84mm INF PRAC ATK SX 404 GF HE SUB T. 257 CY (RoF Chorley) 6/81 (June 1981 date). The top part of the projectile is made of brown anodised steel and the bottom part is anodised grey alloy. The price includes UK delivery and no licence is required to possess this inert round in the UK if retained as part of a collection or display. O 2063 £195.00 |
|
.jpg) |
INERT DEACTIVATED. BL755 Anti-Tank & Runway Cratering Bomblet. - O 2061 INERT DEACTIVATED. This is a British BL755 anti-tank and runway cratering hollow charge training bomblet. The weapon was used by the Royal Air Force in the Falklands, Bosnia and both Gulf Wars. The BL 755 bomblet was developed by Hunting aircraft and entered service with the Royal Air Force in 1973. The BL 755 was a hollow charge sub-munition with the weapons container weighed 600 pounds. The container held 147 of these sub munitions. The sub-munitions consisted of a small high explosive anti-tank warhead with a stabilizing coronet that flipped out on ejection to ensure they were facing forward when they impacted. The trigger was mounted on a spring that extended forward after launch to ensure the bomb fired at the right range from the armour or concrete runway surface. This is an unfired BL 755 bomblet body complete with its hollow charge cone and alloy fin holding tail assembly. This is an army Explosive Ordnance Department training bomblet and is stencilled WAD/EOD/7 inside the copper colour hollow charge. The grey painted body is stencilled in white round the body EXERCISE under a monogram of A*-2. The top of the body has a 6mm red painted ring under the cone. The weapon was used by the Hawker Harrier G.R. 3, Jaguar G,R.1, Blackburn Buccaneer S.2 and the Phantom F.4. The price includes UK delivery and no licence is required to possess this inert item in the UK if retained as part of a collection or display. O 2061 £225.00 |
|
 |
DEACTIVATED INERT. MINT Unfired, German, DM 28 Energa, Anti-Tank Rifle Grenade & Square Transit Tube With Packing Material. - O 2060 DEACTIVATED INERT. This is a mint, unfired German DM 28 Energa type practice rifle grenade complete with its fold up sight, square transit tube with endcaps and the 2 piece internal foam packing. The grenade is painted mid blue and stencilled in white round its circumference UB GGR DM 28 UB LOS HS – 1. The tail section is painted light blue and has a spring loaded light grey pressed steel fold up rear sight graduated at 50, 75 and 100 metres which is attached between two of the cruciform fins. The head of the grenade is made from hard rubber. The square black cardboard transit container is stencilled in white GV 80 UBGGR DM 28 IB 1UBUNGS- GEWEHRGRANATE DM 28 1 TREIBLADUNG 7,62 MM X 51 DM 31 LOS HS-1. The case has two pressed steel container caps, the top one which is stamped are stamped PACKHORSE DM 307. The grenade is packed in two light grey pre formed foam packing pieces. No licence is required to possess this inert round in the UK if retained as part of a collection or display. The price includes UK delivery. O 2060 £295.00 |
|
.jpg) |
INERT DEACTIVATED. German, WW1, Quarter Sectioned Granatenwerfer 16 High Explosive Fragmentation Trench Mortar. Sn - 21202 INERT DEACTIVATED. This is a quarter sectioned German WW1 high explosive fragmentation Granatenwerfer 16. The weapon was first introduced into the Austrian army in 1915 and adopted in a modified version by the Germans in 1916 as the Granatenwerfer 16 for use as a small easily transportable trench mortar giving indirect fire in the trenches. The Granatenwerfer is a type of spigot mortar where the hollow tail of the mortar fits over the spigot of the launcher. Ammunition came in various forms including smoke, high-explosive, illumination, and propaganda mortars. This is a high explosive fragmentation mortar with a segmented body. The mortor has had a quarter section taken out of it to reveal the inner workings. The mortor is complete with its steel nose fuze, gaine and an unfired 8mm Mauser propelling cartridge. The fin assembly of the mortar consists of a turned steel tube with four sets of thin pressed steel fins riveted to it which are in excellent condition. The price includes UK delivery and no licence is required to possess this mortar in the UK if retained as part of a collection or display. Sn 21202 £345.00 |
|
.jpg) |
INERT DEACTIVATED. British, WW2, 1943 Dated, PIAT (Projector Infantry Anti-Tank) HEAT (High Explosive Anti-Tank) Round With Fuse. Sn - 21200 INERT DEACTIVATED. This is a rare British WW2, PIAT (Projector Infantry Anti-tank) HEAT (High Explosive Anti-Tank) round. The round is complete with its original nose fuse. The PIAT was designed in response to the British Army's need for a more effective hand-held infantry anti-tank weapon. It consisted of a steel tube, a trigger mechanism and firing spring, and was based on the spigot mortar system and instead of using a propellant to directly fire a round; the spring was cocked and tightened. When the trigger was pulled, it released the spring that pushed the spigot forward into the rear of the bomb. This detonated the cartridge in the base of the bomb, was then thrown forward off the spigot and if lucky re cocked the weapon for firing again. The PIAT possessed an effective range of approximately 100 yards. This system meant that the PIAT had several advantages, which included a lack of muzzle smoke to reveal the position of the user, the ability to fire it from inside buildings. The PIAT entered service in 1943, and was first used during the Allied invasion of Sicily that year; it remained in use with British and Commonwealth forces until the early 1950s. The PIAT replaced the .303 Boys anti-tank rifle which was adopted in 1937 and soon proved itself unable to defeating heavy armour. As well as being used in the anti-tank role, the PIAT was an effective way of opening doors on buildings at a safer distance and the resulting explosion was usually enough to subdue opposition in the building. This projectile retains most of its original black painted finish and has a yellow, blue, back, blue and yellow bands round the body of the explosive head. The black band has stencilled on it in white 808. The PIAT is complete with its original alloy nose fuse and screw on fuse holder. The PIAT round also has attached to the fin assembly its original 3 piece alloy fuze holder and spring clip assembly. The alloy impact fuze is held in by a bayonet fitting cap that engages onto 2 lugs at the tip of the projectile. The PIAT has its original hollow charge nose cone which is held on by a screw on pressed steel collar. The hollow charge cone at the top of the projectile retains most of its original black painted finish and has a ring or red crosses and dots round it signifying an explosive filling. The cone retains its original felt sealing ring under the screw in collar. The fin assembly has a round makers monogram and 1 43 (January 1943 date). The price for this round includes UK delivery and no licence is required to possess this inert round in the UK if retained as part of a collection or display. Sn 21200 £595.00 |
|
.jpg) |
British, WW2 Era, Mills No 36 Hand Grenade Wooden Box G.36 Mark I For 12 36 M grenades and accessories. Sn - 21195 This is a hard to find original empty wooden British box G.36 Mark I for holding and transporting 12 number 36 mills hand grenades. The box would original have held 12 mills grenades 12 detonators in a tin cylinder, gas checks, and 14 SA cartridges in a tin box. The box is complete with all of its wooden partitions and post separators for the grenades. The grenade box has been overpainted in grey paint for reissue over earlier WW2 markings which was a yellow stencil on a bare wooden box. The original yellow markings are 12 GRENAES HAND NO 36MMK ? together with various other stencils. The other side of the box is stencilled in black on the grey finish RELOTTED 12 GRRENADES HAND ICI/G 14 BM (I) NO 36 MK1 12 DETS MK7 LOT 22 ICY/w 453 . The box is free from any worm or rot. See pages 111 - 119 in ‘GRENADE’ British & Commonwealth Hand & Rifle Grenades by Rick Landers, especially with reference to page 112. The price includes UK delivery. Sn 21195 £295.00 |
|
.jpg) |
INERT DEACTIVATED. British, Early Pattern, 40MM High Explosive Fragmentatioon Rifle Grenade. - O 2057 INERT DEACTIVATED. This is an original early pattern British 40mm high explosive fragmentation rifle grenade for the SA 80 British service rifle. The grenade is fin stabilised and is launched from the adaptor on the SA 80 rifle. This grenade has an alloy body with plastic stabilising fins and blunt nose cap. The round also has a coiled flat wire fragmentation sleeve towards the nose for weight. The nose cap unscrews off the body releasing the fragmentation sleeve. The rifle grenade that retains most of its original dark green finish and the green plastic fin assembly which is held on by a circlip. There is ha hole for a safety pin in the alloy middle of th grenade and there is a number 39 stencilled above the fins in black. The price includes UK delivery and no licence is required to possess this inert grenade in the UK if retained as part of a collection or display. O 2057 £275.00 |
|
.jpg) |
INERT DEACTIVATED. British, Mint, Unfired, 40mm Practice L87A1 Rifle Genade & Transit Tube. - O 2046 INERT DEACTIVATED. This is a near mint, unfired British 40mm L87A1 practice rile grenade used with the British L85A2 5.56mm SA80A2 service rifle with the underslung grenade launcher (UGL) complete with its original 2 piece brown plastic transit container. The UGL consists of a Heckler & Koch AG-36 40mm grenade launcher and EO Tech holographic sight wedded to an ISTEC range drum. The UGL allows fire teams to deliver effective fragmenting munitions out to 350 metres. Advantages of the system are low recoil, ease of use, reduced ammunition weight and ability to have a chambered grenade at the ready whilst continuing to fire the SA80. This rifle grenade is made out of aluminium and consists of a bulbous nose to the projectile which slims to a 175mm shaft and white plastic fins. The nose of the grenade retains its original light blue finish and is stencilled in white GREN RFL PRAC INERT l87a1 I.M.I. 19.98.01 (IMI - Imperial Metal Industries). The grenade has a 70mm white plastic sleeve above the fins and has a total length of 315mm. the brown plastic transit tube is stencilled in yellow GREN RFL PRAC WITH BOOSTER AB6A I.M.I. 10-96-02 (IMI - Imperial Metal Industries). The price includes UK delivery and no licence is required to possess this inert mortor in the UK if retained as part of a collection or display. O 2046 £175.00 |
|
 |
INERT. British, 2001 Dated, 40MM Rifle Grenade Target Practice Marker L60A1. - O 2056 INERT. This is an original British 40mm practice rifle grenade for the SA 80 British service rifle. The grenade is fin stabilised and is launched from the adaptor on the SA 80 rifle. This grenade is the training variant of the L74A1 HEAT (High Explosive Anti-Tank) Grenade. The rifle grenade that retains most of its original dark blue painted finish and the green plastic fin assembly where the fins are canted to give some spin stabilisation to the projectile. The grenade is stencilled along the side in white GREN RFL 40mm TP MARKER L60A1 LUL 02/01 (February 2001 date) – 05. The price includes UK delivery and no licence is required to possess this inert grenade in the UK if retained as part of a collection or display. O 2056 £145.00 |
|
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Next | Page 7 of 27 |
(Page updated regularly)