Grenades
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Next | Page 6 of 27 |
.jpg)  |
INERT DEACTIVATED. 5 x Anti-Aircraft Missile Countermeasure Flares. - O 2077 INERT DEACTIVATED. This is a set of 5 anti-aircraft missile countermeasure flares used by aircraft to counter infra-red homing anti-aircraft missiles. The countermeasures are alloy cases, 4 of them are square and one of them is rectangular. The square ones consist of two No.118. Mk.3 type 8 electrical primed flares, a gold coloured one marked CH 5084 and a gray one marked CCRTG CM RR170 A/AL. the rectangular one is marked FLARE, INFRARED COUNTERMEASURE MJU-7/B. The flare bodies are 205mm long with a 25mm square section except for the MJU-7/M which measures 25 x 50mm in cross section. When discharged the flares function can cause a spectacular display. The price includes UK delivery and no licence is required to retain these inert flares in the UK if retained as part of a collection or display. O 2077 £100.00 |
 |
 |
INERT DEACTIVATED. Vietnam War Period American M67 Fragmentation Hand Grenade And Transit Container. - O 2076 INERT DEACTIVATED. This is a Vietnam War period American M-67 hand grenade with its transit container which is a 2.5-inch diameter steel sphere designed to burst into numerous fragments when detonated. It produces casualties within an effective range of 15 meters by the high velocity fragments. The grenade body contains 6.5 ounces of composition B high explosive. This grenade was developed in the late 1950s and replaced the M61 grenade in the late 1960s. The grenade is fitted with a M 213 time fuse, which is activated after pulling out the safety pin and the handle flying off. The grenade body retains virtually all of its original green paint and is stencilled in yellow GRENADE HAND FRAG DELAY, M67 over 2.72 (February 1972) COMP B LOT LS-56-402. The fly off handle is stencilled in black FUSE M213 MEI-1-38 4.73 (April 1973). The grey cardboard and tinplate transit container is stencilled in white round the circumference G881 COMP B LOT LS-56-538 over 1-GRENADE HAND FRAG DELAY M67 W/FUSE M213 . The black painted tin plated lids are embossed FF TOP CONTAINER M415A1 UAC 3-73 (March 1973). The price includes UK delivery and no licence is required to possess this inert grenade in the UK if retained as part of a collection or display. O 2076 £345.00 |
|
.jpg) |
INERT DEACTIVATED. WW2, Yugoslavian, 1940 Dated, M38 Offensive Hand Grenade. - O 2075 INERT DEACTIVATED. This is a scarce inert WW2 Yugoslavian M35 Defensive Hand Grenade dated 1940. The grenade has a two piece pressed steel body and has a nicely stamped brass screw top with M 38 49 over 40 (49th week of 1940 manufacture date) and a left hand arrow, designating the unscrewing of the cap to fuse the grenade . Under the cap is the alloy percussion primer assembly followed by a thin steel washer. This is a typical grenade used by partisans during WW2 against the German army. The price includes UK delivery and no licence is required to possess this inert grenade in the UK if retained as part of a collection or display. O 2075 £325.00 |
|
.jpg) |
INERT DEACTIVATED. WW2, Yugoslavian, 1940 Dated, M35 Defensive Hand Grenade. - O 2074 INERT DEACTIVATED. This is a scarce WW2, 1940 dated Yugoslavian M35 defensive hand grenade. The grenade was introduced onto service in 1935 and was the main Yugoslavia offensive hand grenade at the start of WW2. This grenade has a segmented cast iron body and has a nicely stamped brass right hand thread screw on safety cap that is stamped M 35, 36 over 40 (36th week of 1940 manufacture date) and Yugoslavian lettering. Under the screw on safety cap is the brass and copper percussion primer assembly with a left hand thread which is complete with its original lead sealing washer against the cast iron body. This is a typical grenade used by partisans during WW2 against the German army. The price includes UK delivery and no licence is required to possess this inert grenade in the UK if retained as part of a collection or display. O 2074 £325.00 |
|
.JPG) |
INERT DEACTIVATED. Scarce WW2 Japanese Type 4 Ceramic Fragmentation Hand Grenade. - O 2073 INERT DEACTIVATED. This is a scarce WW2 Japanese Type 4 hand grenade, commonly known as the Ceramic Grenade that were made at the latter stages of WW2 (late 1944 onwards) by the Japanese due to a shortage of raw materials. The grenades were made from white terra cotta and are glazed with various colours including a very dark brown, tan, cream, white and a clear glaze. When these grenades detonated they fragmented into sharp chards of ceramic being just as effective as a normal cast iron hand grenade. This grenade has a dark chocolate brown coloured ceramic glaze to the body. There is no damage to the grenade or any cracks in the body. No licence is required to possess this inert grenade in the UK if retained as a part of a collection or display. Price includes UK delivery. O 2073 £275.00 |
|
.jpg) |
INERT DEACTIVATED. WW2, 1941 Dated, British No 68 AT Mk III (Anti Tank) HEAT (High Explosive Anti-Tank) Fin Stabilised Hollow Charged Rifle Grenade. Sn - 21303 INERT DEACTIVATED. The grenade, Rifle No. 68 AT was a British anti-tank rifle grenade used during WW2. The No. 68 was an early form of shaped charge grenade, and has some claim to have been the first High Explosive, Anti-Tank (HEAT) device in use. The design of the warhead was simple and was capable of penetrating 52mm (2 inches) of armour in 1940. The fuse of the grenade was armed by removing a pin in the tail which prevented the firing pin from flying forward. The grenade was launched from a rifle cup. The four fins gave it some stability in the air and, provided the grenade hit the target at the proper angle (90 degrees), the charge would be effective. The detonation occurred on impact, when a striker in the tail of the grenade overcame the resistance of a creep spring and was thrown forward into a stab detonator. The grenade is fired from the rifle via a No. 1 Mk.1 rifle bomb discharger cup that fits at the muzzle end of the rifle. This is a rare original WW2, 1941 dated HEAT (High Explosive Anti-Tank) hollow charged No. 68 MK III AT rifle grenade. The grenade is made of die cast alloy with a die cat alloy gas check on the rear. Two of the fins have cast into them No 68 AT III 1941 (1941 date). The base of the body has the makers mark RMLC cast into it. The 68 anti-tank rifle grenade was displaced later in WW2 by improved weapons including the PIAT and other weapons. See ‘GRENADE’ British & Commonwealth Hand & Rifle Grenades, pages 151 – 154 by Rick Landers. The price includes UK delivery and no licence is required to possess this inert grenade in the UK if retained as part of a collection or display. Sn 21303 £245.00 |
|
.jpg) |
INERT DEACTIVATED. Rare WW2, Home Guard, Quarter Sectioned Instructional, 1941 Dated, British No.68 AT (Anti Tank) HEAT (High Explosive Anti-Tank) Fin Stabilised Hollow Charged Rifle Grenade. Sn - 21304 INERT DEACTIVATED. The grenade, Rifle No. 68 /AT was a British anti-tank rifle grenade used during WW2.The No. 68 was an early form of shaped charge grenade, and has some claim to have been the first High Explosive, Anti-Tank (HEAT) device in use. The design of the warhead was simple and was capable of penetrating 52mm (2 inches) of armour in 1940. The fuse of the grenade was armed by removing a pin in the tail which prevented the firing pin from flying forward. The grenade was launched from a rifle cup. The four fins gave it some stability in the air and, provided the grenade hit the target at the proper angle (90 degrees), the charge would be effective. The detonation occurred on impact, when a striker in the tail of the grenade overcame the resistance of a creep spring and was thrown forward into a stab detonator. The grenade is fired from the rifle via a No. 1 Mk.1 rifle bomb discharger cup that fits at the muzzle end of the rifle. This is a rare original British home Guard instructional WW2 HEAT (High Explosive Anti-Tank) hollow charged No. 68 MK III AT rifle grenade with a quarter section taken out to reveal the grenades inner workings. The grenade is made of die cast alloy with a steel screw on nose cap with a brass washer. The steel gas check is stamped REVO 1941 (1941 date) with a crowfoot in a diamond and is secured to the rear by a brass screw. One of the fins of the tail unit has been removed to reveal the firing pin and creep spring assembly. Two of the other fins have cast into them 68 AT III 1941 (1941 date) and a makers monogram BDC. The grenades firing pin assembly is complete and the explosive contents are simulated with a painted inert filling. This filling has an inert.410 brass cartridge case in it above the firing pin. The 68 anti-tank rifle grenade was displaced later in WW2 by improved weapons including the PIAT and other weapons. There is a contemporary photograph shows a member of the Home Guard with a rifle equipped to fire a No68 anti-tank grenade at Dorking, 3 August 1942. See ‘GRENADE’ British & Commonwealth Hand & Rifle Grenades, pages 151 – 154 by Rick Landers. The price includes UK delivery and no licence is required to possess this inert grenade in the UK if retained as part of a collection or display. Sn 21304 £295.00 |
|
.jpg) |
DEACTIVATED INERT. WW2 1940 Dated, British, DRILL, No.69 I Bakelite Hand Grenade By DLR (Thomas De La Rue London) With All-Ways Weighted Fuse Tape. - O 2070 DEACTIVATED INERT. The British No 69 was a hand grenade developed and used during World War II. It was adopted into service due to the need for a grenade with smaller destructive radius than the No 36M Mills grenade. This allowed the thrower to use a grenade even when there was little in the way of defensive cover. In contrast, the much greater destructive radius of the Mills bomb than its throwing range forced users to choose their throwing point carefully, in order to ensure that they would not be wounded by their own grenade. The shell of the No 69 grenade is composed entirely of the hard plastic, Bakelite, which shattered without producing fragments like a metal bodied grenade. Metal fragmenting sleeves were available to increase the grenade's lethality. Using the No 69 bomb was very simple: the screw-off cap was removed and discarded, and the grenade was then thrown. When the grenade was thrown, a linen tape with a curved lead weight on the end automatically unwrapped in flight, freeing a ball-bearing inside the fuse. In this manner the all-ways fuse was armed in flight and the grenade exploded on impact and like the Gammon grenade, which used the same fuse design, it was withdrawn from service soon after the Second World War ended. This is an excellent original WW2, 1940 dated No.69 I DRILL hand grenade. It has the correct Bakelite body with screw off cap and all-ways weighted fuse cord. The grenade retains most of its original white painted finish and is stenciled in black near the base DRILL. The base of the grenade is embossed No.69 I and D.L.R.-40 (No, 69 grenade mark 1, Thomas De La Rue London, 1940 date). the grenade is fitted with a dummy screw out primer holder and a white dummy fuze to practice fuzing the hand grenade. The top of its screw off cap is embossed 247 MK II (No 247 mark 2 allways fuse). The inside of the cap is embossed K36. Under the screw off top is the metal weighted fly of tape. See pages 155 - 157 in ‘GRENADE’ British & Commonwealth Hand & Rifle Grenades by Rick Landers. No licence is required to possess this grenade in the UK if retained as part of a collection or display. Price includes UK delivery. O 2070 £275.00 |
|
.jpg) |
INERT DEACTIVATED. MINT, Unfired, American, Korean War Era, 1947 dated, 4.2 Inch Quarter Sectioned M329 High Explosive (HE) Mortar & Fuze. - O 2067 INERT DEACTIVATED. This is a mint Korean War Era, 1947 dated unfired American 4.2 inch high explosive mortor with a quarter section taken out of it to show the internal workings of it. The mortors body is made of steel with a copper driving band. The mortor has no stabilising fins and instead has copper driving band which engages in rifling in the mortor to give the projectile spin stabilisation. The mortor retains all of its original painted finish which is olive green and is stencilled in yellow on the side M 329 TNT 4.2 IN-M W/SUPL.CHG AMM LOT 10P 2-47 (February 1947 date) SECT. The brass and steel nose fuze is stamped round its circumference DDM 51A5 .05 SEC BW/ES/62. The fuze is also stencilled at the top INERT and has a white painted top. The price includes UK delivery and no licence is required to possess this round in the UK if retained as part of a collection or display. O 2067 £495.00 |
|
.jpg) |
INERT DEACTIVATED. British, 1956 Dated 2” Proof Mortor. - O 2064 INERT DEACTIVATED. This is a rare and original British, 1956 dated 2inch Proof mortor which was used to proof 2 inch mortor barrels. The mortor retains most of its original black painted finish (Proof) and is made out of a turned solid steel 2 inch diameter body with a tubular tail section secured to the body by a screw. This tail section is ventilated for the firing cartridge. The body of the mortor is stamped round its circumference 2LB 15OZS 2MOR1 11/56 (November 1956 date), a crowfoot and 2 manufacturers marks. The base of the tail assembly has an alloy safety cap which is embossed CRB on one side and 42 (1942 date) on the other. Due to the nature of a proof round, there are no stabilising fins. The price includes UK delivery and no licence is required to possess this inert mortor in the UK if retained as part of a collection or display. O 2064 £175.00 |
|
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Next | Page 6 of 27 |
(Page updated regularly)