Antique Guns and Equipment
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Next | Page 10 of 49 |
  |
**RARE**.1874 American Evans New Model, .44 Evans Long, 26 Shot Repeating Obsolete Calibre Carbine. Sn - 23074 The Evans repeating rifle is often considered to be one of the oddest rifles to ever be produced in the United States. The gun was invented by Warren R. Evans and started the Evans Rifle Manufacturing Company of Mechanic Falls, Maine in 1873. The Evans rifle also had the largest magazine capacity of any rifle mass produced in the 19th century and it was hoped for a Army contract. The mechanism of the rifle was not very sturdy and did not do well with dust and after trials with the United States Army, the rifle failed the standard dust test. With no military contract, the gun was offered as a sporting rifle. The rifle has a radial block receiver similar to the Spencer, but the rounds were fed from an archimedean screw magazine which formed the spine of the rifle stock and could hold up to 28 rounds. The fluted cartridge carrier made a quarter turn each time the lever was operated, feeding a new cartridge into the breech. The mechanism was not very sturdy and did not do well with such things as dust and in December 1879, the Evans Rifle Manufacturing Company went bankrupt. Only 15,000 Evans repeating guns were produced between 1873 and 1879. This is a third model (New Model) Evans repeating carbine with a 22 inch barrel. The gun fired a unique .44 x 1 ½ inch rimmed centre fire cartridge and was loaded from a opening in the steel butt plate protected by a sliding cover. Previous models used a 1" long case of the same caliber and new cartridge necessitated a reduction in magazine capacity to only 26 rounds. Approximately 4,000 of these New Model carbines were produced between 1877 and 1879 when the company went bankrupt. Very few have survived. The New Model is easily distinguished by its larger, more robust 2 piece receiver and sliding dust cover over the ejection port to try to cure the dust problems. This carbine measures 39 inches in length and is in good condition. The carbines barrel is fitted with a 1000 yards ramp and ladder rear sight and a bead fore sight on a block near the muzzle. The top of the barrel is stamped EVANS REPEATING RIFLE MECHANIC FALLS ME PAT DEC.8, 1868 7 SEPT.16, 1871. The metal work has a nice even patina and retains some of its original blued finish. The mechanism works as it should and the archimedean screw magazine rotates a quarter turn when the cocking lever is moved. The rifle has a clean bore with feint rifling. Due to the magazine capacity, the Evans repeating rifle was also used by Buffalo Bill in his circus. The weapon’s loading, cocking and firing actions work crisply. As an obsolete calibre antique firearm, no licence is required to own this item in the UK if retained as part of a collection or display. Sn 23074 £2,400.00 |
 |
 |
**RARE**C1840 Victorian Unwin & Rodgers Sheffield Self Protector Etched Blade 120 Bore Muzzle Loading Percussion Combination Knife Pistol With Horn Scales, German Silver Octagonal Barrel & Fittings, Ball Mould & Tweezer Grip Insert Accessories & Balls. - 23092 This is an original rare to find Unwin & Rodgers combination knife percussion pistol. Overall the pistol when closed is 6 ½” overall length. The octagonal barrel, frame, bolsters and integral box with hinged lid for ball and patches on the rear of the frame are German silver. The 3 ½” octagonal barrel has a small bead fore sight & English black powder proofs. The smooth bore has staining & residue consistent with age and use. It has a steel hammer and folding trigger. Its cocking & firing actions are strong. There are two folding knife blades, one 3 ½” length and signed ‘Unwin & Rodgers Sheffield’. This blade has a blued etched panel on one side with wording ‘Self Protector’ amongst foliate decoration. The other blade is 2 ½” length also signed ‘Unwin & Rodgers Sheffield’ together with Queen’s Crown & ‘VR’ (Victoria Regina). It has undamaged polished horn grips. Each scale near to the but has inserts for accessories. One insert contains a brass ball mould, the other a pair of steel tweezers. The price for this rare piece includes UK delivery. NB As an antique, muzzle loading percussion combination pistol, no licence is required to own this item in the UK if retained as part of a collection or display. Sn 23092 (drawers office) £1,495.00 |
|
 |
Victorian C1840 English Form Pointer 16 Bore Double Damascus Barrelled Muzzle Loading Percussion Sporting Shotgun. Sn 23090 - 23090 This is a Victorian era double barrel percussion sporting shotgun in English form. It has 22 ¾” Damascus steel barrels and measures 46” overall. The barrels, set side by side have a central flat top barrel rib with brass bead foresight. The barrel’s smooth bores are clean. It has its original walnut straight hand stock in very good condition with chequered grip panels & inlaid German silver void escutcheon on top of the wrist. It’s steel butt plate tang, steel trigger guard with extended tang and acanthus bud finial, action tang, hammers and action plates have foliate engraved decoration. The action plates are both signed ‘Pointer’ (unknown, we cannot find a period gunmaker named pointer in our books or online). The shotgun has its wood ramrod with brass cap and steel worm. The weapon cocks & dry fires crisply. The price for this gun worthy of further research regarding the maker includes UK delivery. NB. As an antique percussion shotgun no licence is required to own this weapon in the UK if retained as part of a collection or display. Sn 23090 £575.00 |
|
 |
British, Flintlock, 1761 Dated, .65” Calibre Brown Bess Cavalry Carbine with 20“ Barrel Marked to the 2nd Dragoon Guards. - A 1007 Various cavalry carbines were based on the Brown Bess rifle were used by the British army with various barrel lengths and lighter stocks/metalwork. Various guns were made for the 7 years war between 1756 and 1763 and the Birmingham gunsmith Grice made several types of them. The carbine has a short barrel length of 20 inches with an overall length of 35 inches. This carbine is marked on the top of the brass butt plate 2 D G (2nd Dragoon Guards) C over 56 (the rack and gun number). The musket is fitted with a lock plate nicely engraved 1761 GRICE (the gunmaker) Crown over GR (George Regina) and an ordnance inspection mark. The bevelled lock plate has double lined engraving and is fitted with a nice early swan necked cock with 2 line engraving to the borders and mild engraving to the side. The carbine is fitted brass furniture wit 2 cross pinned ramrod pipes, the front one being bell mouthed. The cavalry carbine is fitted with the correct pinching to the front of the trigger guard with no hole for a sling swivel. The carbine has a ring and saddle bar fitted between the side plate using one of the side plate screws and attached to the forend by a cross screw. The barrel is secured by 2 cross pins and a screw at the tang. The barrel is fitted with a captive ramrod retained by a lug under the muzzle of the barrel and a pair of ramrod swivels. The metal work has an even patina throughout and the barrel has staining and residue consistent with age and use. The brass fittings are in good condition and the woodwork is in good condition with the normal knocks and bumps from service use. See British Military Longarms 1715-1815 by D.W.Bailey and British Military Firearms 1650-1850 by Howard l. Blackmore. The price includes UK delivery. As an antique musket no licence is required to own this item in the UK if retained as part of a collection or display. A 1107 £2,995.00 |
|
.jpg) |
SOLD SOLD (02/01 lAY-AWAY) **PRESTIGIOUS MAKER**C1860’s Victorian English, Harris Holland Rotary Underlever Double Damascus Barrelled Breech Loading 12 Bore Pinfire Obsolete Calibre Sporting Shotgun. Sn 23091 - 23091 In 1870 Holland & Holland did not exist. In fact, it would be six years before the firm’s founder, Harris Holland, was to take in his nephew Henry and create the iconic brand which now graces London’s Bruton Street. Harris Holland was a was a good shot with both rifle and shotgun, regularly competing in live-pigeon competitions at Hornsey Wood Tavern. He appears to have gained enough kudos among fellow shooters for them to start asking him to get them guns and rifles like the ones he used so successfully himself. Seeing a clear business opportunity, Harris ordered guns made to his specification. 98 New Bond Street London was Harris Holland’s address from 1858. His nephew Henry Holland joined him in 1876, when Holland & Holland became the company style. It was not until 1893 that Holland & Holland built their factory on Harrow Road London. This is a nice double barrel sporting pinfire shotgun by H. Holland no doubt Harris before he joined with Henry. It has 30” double Damascus steel smooth bore barrels with flat top barrel rib and brass bead fore sight. The barrel’s bores have just light staining consistent with age and use. Both action plates are signed by the maker ‘H. Holland’. The inside of the action has English black powder proofs. It has double hammers and double triggers. The shotgun’s cocking and firing actions work crisply. The shotgun’s stock has chequered panels at the wrist and fore stock. It has a steel Trigger guard with extended tang numbered & thick horn butt plate. The underside of the shoulder stock has an inlaid void white metal escutcheon. The price for this shotgun by a quality maker includes UK delivery. NB As an antique obsolete calibre pinfire shotgun no licence is required to own this item in the UK if retained as part of a collection or display. Sn 23091 £0.00 |
|
 |
**UNIQUE BREECH LOADING BOLT ACTION TRIALS RIFLE**MINT BORE**Victorian British George Henry Daw, London Enfield Pattern 1856 Muzzle Loading Rifle Converted to Breech Loading Bolt Action .577 Obsolete Calibre. Sn 18023 - 18023 George Henry Daw was an English Gunmaker recorded as having premises at 57 Threadneedle Street London C1860 -1879. This is an original British trials rifle by Daw made in the transition era of muzzle loaders to breech loading actions and is most likely unique. The rifle has been period converted to breech loading using a muzzle loading P1856 short rifle platform. The percussion action removed and replaced with the hinged breech cover that would later be found on snider patent weapons but with the addition of a hammerless bolt action. This rifle has a 31” round steel barrel with a near mint bore, clean & bright with well defined rifling. The top of the barrel is signed ‘G.H. Daw 57 Threadneedle Street London’. The metal work has even aged patina throughout. The all original woodwork has knocks bumps and bruises to be expected. The action plate is signed ’G.H Daw London’. The action is strong and works as it should. It has sling swivels, original iron cleaning rod, fixed foresight and adjustable rear ladder sight and bayonet bar. The forward sling swivel has an old inventory label attached which has obviously been with the rifle for many years. The label has ink writing ‘M694’.The price for this unique trials piece includes UK delivery. NB As an obsolete calibre rifle no licence is required to own this weapon in the UK if retained as a part of a collection or display. Sn 18023 £1,595.00 |
|
 |
**QUALITY**CASED**C1870 Julien Joseph Liege Belgium 12mm Pin Fire Obsolete Calibre Double Action Revolver Retailed By ‘Bertonnet Calle San Martin No 50 a Buenos-Ayres’ With Accessories. A 1066 - A 1066 Julien Joseph was a Belgian gumaker at Street Nagelmackers, 3 Liege. He recorded 5 gun patents between 1865 to 1876. This is a quality made Liege 6 shot 12mm double action pin fire revolver by Julien Joseph. It has a 6 ¼” round steel barrel with raised rib on which the top frame strap and integral hinged loading gate (12 ¼” overall). The breech is stamped “BREVETE, J. JULIEN” over traces of indistinct lettering, the gate arm has faint J. Julien Brevete and other indistinct stamped letters, the rib is engraved in gothic script “Bertonnet Calle San Martin No 50 a Buenos-Ayres” most likely the retailer (all illustrated). The rifled bore has just light staining consistent with age and use. The frame and cylinder are engraved overall with foliate panels and has some original blue finish. The cylinder has Liege ELG proof mark. The ebony grips are deeply carved with vine leaves and tendrils (one grip has an old, fine, stable crack, both grips are secure). The grip is fitted with military lanyard ring. The pistol has a blade fore sight and notched plate rear sight. It has a captive steel ejector rod and its firing mechanism works correctly in both single & double action. The revolver is contained in its close fitted velvet lined mahogany case, with brass escutcheon to the lid and contains accessories which consist of a brass mounted ebony cleaning rod, ebony turn screw handle (no blade), pewter oil bottle with screw off lid which has an oil applicator and a compartment with tray for cartridges. The case has its key which locks the case correctly. The price for this quality pistol includes UK delivery. NB. As an obsolete calibre, antique pin fire revolver no licence is required to own this item in the UK if part of a private collection or display. A 1066 £1,195.00 |
|
.jpg) |
American Civil War Era, BACON MF'G. CO, .31 Calibre, 5 Shot, Single Action Percussion Pocket Revolver (Colt’s Pocket Model Of 1849). Sn 20709:24 - 20709:24 Thomas K Bacon originally worked for the American Manhattan Firearms Company before leaving C1859 to set up his own business BACON MF'G. CO. NORWICH CONN (When Colt's Patents for revolving firearms expired in 1857 Colt Patent expired weapons were produced by a number of American manufacturers). This is an excellent, original 4” octagonal barrel .31 Calibre, 5 shot percussion revolver with drop down loading lever produced by Bacon Mfg Co C1860 similar in design to Colt’s Pocket Model of 1849. The metal work has even patina throughout with original finish. The top of the barrel is faintly marked ‘Bacon Mfg Co, Norwich Conn’. The underside of the barrel is numbered ‘449’. The barrel’s bore has light rifling and staining consistent with age and use. It has undamaged Walnut grips which have just bumps and bruises to be expected with age. The pistol's single action firing mechanism works crisply. The price includes UK delivery. NB. As an antique percussion revolver no licence is required to own this weapon in the UK if retained as part of a collection or display. Sn 20709:24 £1,095.00 |
|
(1).jpg) |
**MINT BORE**American Civil War Era, 1862 (Early Production) Factory Nickel Plated Colt Model 1861 Navy Single Action 6 Shot Revolver Factory, 3 ½” Re-Barrelled & Converted To Side Port Loading .38 Rim Fire Obsolete Calibre. Sn 20709:15 - 20709:15 The Colt Navy .36 calibre cap & ball revolver was a single-action percussion revolver produced by Colt's Manufacturing Company. It saw widespread use in the American Civil War and on the American western frontier. This is an original example of the Colt M1861 Navy revolver contemporarily factory re-fitted with shorter 3 ½” barrel & converted to .38 RF Calibre (similar examples of Colt conversions are illustrated & described in chapter XVII of Serven’s book Colt Firearms and a Colt 1861 Navy conversion similar to ours with 3 ½” round barrel is illustrated on page 193 of the same book). The pistol’s bore is near mint clean and bright with crisp rifling. The pistol measures 8 ¾” overall. The pistol retains its original factory nickel plating which is tarnished in areas consistent with age and handling and it has a brass grip frame. The top of the barrel is stamped with correct 2 line ‘Colt’s PT. F.A MFG. Co Hartford CT. U.S.A.’ address (see page 192 of Serven’s book). The left side of the frame is stamped with correct Colt’s 1871 & 72 patent detail (see page 193 of the same book & .36 Cal (the original calibre prior to its conversion, illustrated) . The cylinder has a clear ‘Stage Coach Hold Up’ scene engraved. Matching numbers ‘3437’ are stamped on the grip frame, butt, frame, barrel & cylinder. The serial number is in the early production range of 1862. It has an undamaged Walnut grip. During the contemporary conversion process the pistol was made open side port loading without ejector (as illustrated on page 193 of Serven’s book). The barrel has a small conical post fore sight and the rear sight is a ‘v’ notch in the hammer. The pistol’s single action firing mechanism works crisply. The price includes UK delivery. NB As an obsolete calibre antique revolver no licence is required to own this item in the UK if retained as part of a collection or display. Sn 20709:15 £1,195.00 |
|
.jpg) |
**QUALITY**Cased, C1870 Lefaucheux Patent Bertonnet en Paris, Buenos-Ayres, y Montevideo 7mm Pin Fire Obsolete Calibre Double Action 6 Shot Revolver With Polished Bone Grips, Blued & Gold & Silver Inlaid Decoration & Accessories. Sn 17889 - 17889 An attractive, quality made, 6 shot 7mm Lefaucheux closed frame double action pinfire revolver, number 45950. It has a round barrel 3½” length with raised top rib. The barrel’s bore is clean with crisp rifling. The breech is stamped “E. LEFAUCHEUX INVR. BREVETE”. The factory blued frame and cylinder are inlaid with silver leaves and gold tendrils and lines, the barrel with simple silver line inlay. The side gate loading pistol has a folding trigger, captive ejector rod, blade fore sight, notched plate rear sight & plain undamaged, polished bone grips. Its double action firing mechanism works correctly in both single & double action. The revolver is contained in its fitted blue velvet lined rosewood veneered case. The lid is brass bound with escutcheon within double line panel. The lid lining has gold blocked lettering “Bertonnet en Paris, Buenos-Ayres, y Montevideo” (most likely a retailer or finisher of pistols). The case contains accessories which include: turn screw with wood handle and bone cap, cleaning rod (ebony cap chipped but stable), ebony oil bottle with bone cap, compartment for cartridges, and key to the case (which works correctly). The price for this excellent piece includes UK delivery. NB. As an obsolete calibre, antique pin fire revolver no licence is required to own this item in the UK if part of a private collection or display. Sn 17889 £1,345.00 |
|
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Next | Page 10 of 49 |
(Page updated regularly)