Items: 0 Price: £0    
view cart

Bayonets - British

Previous 1  2  3  4  5  6  7  8  9  10  Next Page 6 of 10

British 1907 Bayonet and Scabbard By J.A. Chapman. Bayo 119 - Bayo 119
This bayonet is by J.A. Chapman who were the third lowest producer of 1907 bayonets after Vickers and Mole with only 300,000 bayonets made compared to the 2,360,000 bayonets made by Wilkinson. The blade is stamped with a crown over "G.R." followed by the date "1907". Below this is the date of manufacture "9 15" denoting September 1915 and finally the initials "JAC". The other side of the blade carries the Broad Arrow and several inspection marks. It is complete with a No 1 MK II Steel mounted leather scabbard with round frog stud. (See Skennerton's, Item B235 Pages 187-192). A very nice bayonet by a scarce maker. The price includes Uk delivery. Bayo 119

British Pattern 1887 MK III Sword bayonet & Scabbard. Sn. ED 2197 - ED 2197
This bayonet is the MK III pattern of 1887 with no fullers to the blade. The blade carries a Crown over "V.R." and the date "88" (1888). It was probably made by Enfield but no name appears on the blade. Wilkinson clearly stamped their blades and there were on other producers. The top edge and reverse of the blade carry inspection marks and the broad arrow over "W.D." There are also inspection marks on the tang and a number "46" on the pommel end. The polished steel blade is in very good condition and measures 18 1/4" long. The grips are secured with two steel rivets. The pommel has a push button release and is stamped with the number10522. It is complete with a brass mounted scabbard which has a small number 7 on it near to the outside edge. The scabbard chaff is stamped CHF Crown over I OO . Please see Skennerton's Bayonet Book, Pages 160 to 166 and page 338 (Indian section) regarding these brass mounted scabbards. The price includes Uk delivery. Sn. ED 2197

British L1A3 Bayonet, With Straight Cross Guard, Short Fullers & Scabbard. Bayo 112 - Bayo 112
A British L1A3 bayonet with straight cross guard, short fullers and scabbard made in Enfield in 1967. During the mid 1960's it was found that the long blade fuller which extended almost to the crossguard, resulted in a weakness in the blade and made the tempering process difficult. As a result, the length of the fuller was reduced to about 4.2 inches, terminating about 1.4inches forward of the crossguard. As a result the blade is heavier, without tapering in thickness towards the point. On later models the crossguard is not waisted but straight. This bayonet has a straight cross guard and short fuller. The bayonet has a blackened pommel with recessed release stud. The grips are blackened steel and are both stamped with "L1A3 9600257 D67" indicating it was made at Enfield in 1967. They are secured with two recessed steel rivets. The polished steel blade has a short fuller with single edge. It measures 8" long, 12" overall. The ricasso is stamped with "D 67". The scabbard is blackened and in excellent undamaged condition. (see page 261, last paragraph in Skennerton's British & Commonwealth Bayonet Book). The price includes Uk delivery. Bayo 112

SOLD SOLD (19/11) British 1888 Pattern MK I Type 2 Enfield made, Boer War Era Bayonet Regimentally marked to the Seaforth Highlander's and Scabbard With Slade Wallace Leather Frog. Bayo 102 - Bayo 102
The Enfield Lee Metford, 1888 Mark 1, Type 2 Bayonet was manufactured for the British .303 calibre Enfield, Lee Metford Rifle which were issued to British and allied forces during the Boer war and WW1. The pommel is stamped on one side with "SEA" (Seaforth Highlander's) and on the other with weapon number "129". The slab wooden grips are the standard MK I second type with the oil drainage hole drilled through the grips near to the top rivet. The Bayonet has a nice clean double edged and unfullered blade with a medial ridge running from the ricasso to the blade tip. The ricasso of the blade is marked with a Crown "VR" and "10 96" but no makers name, identifying the bayonet as being manufactured in October 1896. On the opposite side and edge are inspection marks together with 'WD' and the 'Broad Arrow'. This excellent condition bayonet comes complete with leather scabbard which is in great condition and a 'buff' coloured 'Slade Wallace' leather, buckle fastening frog with large single belt loop. The frog is also in great undamaged condition with all stitching intact and has a War Department ink stamped arrow and number '30' on the back. (see Carter's book 'Bayonet Belt Frogs' Volume One Page 22). The price includes UK delivery. Bayo 102

1891 Dated, Pattern 1888 Mark I, 2nd Type Bayonet & 1903 Land Pattern MK I Scabbard With Integral Frog. Bayo 99 - Bayo 99
The Enfield Lee Metford, 1888 Mark II Bayonet was manufactured for the British .303 calibre Enfield, Lee Metford Rifle which were issued to British and allied forces during the Boer war and WW1. The Bayonet has a clean slightly stained 12" double edged and unfullered blade with a medial ridge running from the ricasso to the blade tip. The ricasso of the blade is marked '2 91' (manufactured in February 1891). Above is stamped a Crown and "V.R." and many inspection marks. On the reverse it is stamped with War Department 'WD' and 'Broad Arrow'. The pommel is stamped with a number "209". The bayonet's grips are secured with two brass rivets. The grips have a clearance hole drilled through them. This bayonet comes complete with original 1903 land pattern MK I leather scabbard with integral frog which is in excellent condition. These were interchangeable between 188 and 1903 patterns. However it has been suggested that Naval Division Troops used this configuration of 1888 bayonet and 1903 scabbard. (see Skennerton's Book, item 215, pages 170 & 171 & page 183). The price includes UK delivery. Bayo 99

Early 1800's, Baker, 2nd Pattern Sword Bayonet By Reeves & Co. Sn 7094 - 7094
The Baker sword bayonet with curved knuckle bow was introduced in 1805. This bayonet along with it's rifle became synonymous with contemporary drawings and sculptures of Riflemen at that time. (See page 65 of British & Commonwealth Bayonets By Skennerton). Baker was patronised by the Prince of Wales which certainly had a bearing on the success and acceptance of his rifles and popularity of this distinctive Bayonet. This is an all original 2nd Pattern Baker Sword bayonet. It's 22 1/2 " long, straight blade is a broad 1 1/4 " with a single edge and broad back ( 27" overall). The blade has even patina throughout and the back of the blade is crisply stamped by the manufacturer 'Reeves' which is Reeves & Co. It has a heavy ribbed brass handle and full curved knuckle bow with rounded langet. The mortice slot and fixing mechanism with flat spring and large stud button are present and work perfectly. The langet is crisply etched '16' and 'BO' with motif beneath. The blade sit's secuely within the grip but there is slight movement of the hand guard / knuckle bow. As is usual with the majority of these bayonets it is without it's scabbard. Price for this rare, nicely marked item includes UK delivery. Sn 7094.

WW1 RAF 1907 Pattern Bayonet By Wilkinson In 1917 Pattern Scabbard & Frog. - Bayo 37
A British 1907 Pattern bayonet by Wilkinson, with a 1917 pattern scabbard and WW2 1940 dated leather frog. This is an original 1907 bayonet by Wilkinson of Pall mall dated 'July 1918'. It is regimentally marked on the pommel to the R.A.F. The scabbard is an American style 1917 pattern with the belt hooks and this has been attached to a British Leather frog by Lees (W) Ltd and date stamped 1940 with a War Department 'Broad Arrow', obviously for the Home Guard re-issue. (see Skennerton's 'British & Commonwealth Bayonets' book, page 236). The bayonet has smooth wood grips secured with two screw bolts. The pommel has a push release button which works as it should. The crossguard is waisted and has a muzzle ring. The blade is fullered. It has a single edge. The leather scabbard has a metal chape and locket. The stitching on the scabbard is all present and secure. This is an interesting combination showing the long life of these bayonets and scarce markings to the R.A.F. The price includes Uk delivery. Bayo 37

1st Pattern, 1909 Dated Hook Quillon '07' Sword Bayonet By Wilkinson & No.1 MK 1 Scabbard With WD & Enfield Inspection Marks. Sn 11213:2 - 11213:2
1st type 1907 pattern bayonets with hook quillon were introduced in 1908, after 1913, ‘07’ Pattern bayonets were produced without hook quillon (see page 186 of British & Commonwealth Bayonets by Skennerton). This is an original 1st type hook quillon 1907 pattern sword bayonet by Wilkinson, complete with original scabbard. The sword bayonet has a 17" steel single edged blade which is stamped at the ricasso on one side with the King’s Crown, ’10 ’09 date (October 1909) and ‘1907’ (Pattern) together with ‘Wilkinson’ (manufacturer). The reverse is stamped with inspection marks. The bayonet is fitted with 1st pattern hook quillon cross guard which incorporates a muzzle ring. The grips are secured with two screw bolts and have impressed inspection marks. It is complete with its original No.1 MK 1 steel mounted brown leather scabbard. The leather of the scabbard is impressed with a WD arrow and Enfield ‘EFD’ inspection marks. All the stitching and leather of the scabbard are intact. The price for this 1st type hook quillon bayonet and scabbard includes UK delivery. Sn 11213:2

British Pattern 1903, Sword Bayonet & Land MKII* 1888 Leather Scabbard With Integral Frog. Sn 10880:62 - 10880:62
In 1902 Experimental Long and Short bayonets were trialled to succeed the 1888 pattern Bayonets. After the trial period it was decided that, when fixed to rifles, the Short version affected accuracy of fire less than the Longer heavy version. The short bladed version was approved and introduced as the '1903 Pattern' sword bayonet. This is an excellent example of the 1903 pattern bayonet. It has a 12 inch, un fullered, double edged, blade with medial ridge. The ricasso is crisply stamped with "Sanderson Sheffield" and inspection marks on the ricasso edge. It has a steel pommel with push button release. It's wood grips are in excellent condition and secured with two screw bolts. The bayonet is complete with it's brown leather land pattern MKII* scabbard with internal chape and integral frog. The scabbard is stamped on the reverse with War Department 'Broad Arrow' over EFD and Crown denoting Enfield acceptance. The price includes UK delivery. Sn 10880:62

British Contract Ross Bayonet & Scabbard. 10880:56 - 10880:56
A British contract Ross bayonet and scabbard. This differs slightly from the Canadian issue in having the original blade profile (Like the MK I Ross) and no Canadian manufacture dates and pommel marks. The pommel is steel and has a push button release. It has a faint stamp, "Ross Patent". The slab wood grips are secured with two screw bolts. The grips are in good undamaged condition. The cross guard is straight and has a muzzle ring. The cross guard edge has a War Department 'Broad Arrow' stamp. The polished steel blade is un fullered and measures 10". The steel, leather covered scabbard is in very good condition and incorporates a frog and belt loop. It has a faint year stamp "19?9". ( See White & Watts The Bayonet Book, item B 240 on page 196). The price includes UK delivery. Sn 10880:56
Previous 1  2  3  4  5  6  7  8  9  10  Next Page 6 of 10